Dakota Modelers Group

Tag: model-railroading

  • Beating a Dead Horse: NCE or Digitrax?

    One of the most frequently asked model railroad questions on the web is “Should I buy NCE or Digitrax?” I have a question in return, why? This has been a topic that has been had since the mid-2000’s when both companies first released their respective starter DCC systems. Comparing the two companies has resulted in many arguments and ended friendships, yet people still want to know which system they should invest in. Well, Jordan and I put together a video to sort it out. We thought it would only be about ten or fifteen minutes, but it turned into a forty-eight minute long discussion comparing the two systems. I highly encourage people to go watch the video, but for those of you who don’t have that much time, this article is a summary of our thoughts.

    What is DCC?

    Before going into the systems themselves, we ought to clarify what DCC is. Digital Command Control (DCC) is a technology that is now in its fourth decade of existence and it has become the control system of choice for most model railroaders. DCC uses electrical signals mixed with DC current to communicate between a command station and locomotives on the track. Each locomotive is assigned its own number, usually the locomotive number on the cab, and signals which are not meant for a certain locomotive do not trigger a response from any engine except for one with that decoder number.

    DCC is also a one-way communication system. Signals are sent to decoders which respond to commands, but they don’t talk back like how components communicate within a computer. Radio Control works in a similar way, except that model railroaders have the advantage of always running their trains on metal rails which can carry electrical signals more efficiently than radio waves. The end result is that DCC systems allow model railroaders to run multiple trains at once on the same track without interfering with each other. DCC not only saves on wiring and the complexity of block control, but also offers model railroaders more features than hobbyists in the past could ever dream of!

    NCE Power Cab vs Digitrax Zephyr Express

    Convinced you want to invest in DCC? I don’t just throw the word “invest” out there to sound smart (okay, maybe sometimes), getting into DCC is indeed an investment. Every locomotive will need a decoder and the upfront costs are at least double that of buying an analog DC controller. Looking at the market, there are a lot of options available, but the two most common are offerings from NCE and Digitrax and hobby shops will stock at least one of these two systems.

    The NCE corporation produces a basic DCC starter system called the “Power Cab” which has been in production since 2006. Retailing with an MSRP of $249, this system can typically found for just under $200 if you know where to look. The handheld throttle doubles as a command station which differs from the more advanced DCC systems out there which has a command station located somewhere on the train layout. This means that you cannot unplug the Power Cab and move to another phone jack without also losing power to the train layout. The good news though is that with the addition of more throttles or a WiFi system, its possible to use throttles with the Power Cab and walk around with trains as they run instead of being limited to the length of the cable tether.

    Digitrax came out with its original Zephyr at about the same time as NCE’s Power Cab, but in 2019 the system got a much-needed update. The Zephyr Express came out in January of 2019 and features soft-touch buttons and a backlit LCD screen along with a throttle similar to that of an old power pack all in a single device that can be mounted somewhere on the train layout. The issue with this system is that more throttles are needed to move outside of arms’ reach of the command station / master throttle. The good news though is that since the Zephyr Express doesn’t need to fit in the palm of one’s hand like a TV remote there is room inside to boost the amperage all the way to 3 Amps, which in this day and age is going to be five or six DCC-equipped HO scale locomotives.

    The two systems are very comparable to each other outside the obvious differences in design philosophy, but here’s a breakdown as to where one system outshines the other:

    Price

    Both the Power Cab and Zephyr Express can be found at right around the $200 mark and their MSRP is only about $10 apart, which these days isn’t a whole lot. That’s what, three candy bars? A large iced coffee? So the two starters systems are in a dead heat with each other in terms of price and it shows just how far a little competition goes in a small industry like model railroading. Due to each other’s presence, the price stays low enough that someone can easily get started with either DCC system.

    Where the two companies diverge in price is in the higher-end products. Digitrax takes a clear win here with a fully modular approach that allows a customer to build the system which suits their needs. NCE also has a modular system of components but they don’t always play together seamlessly. More importantly, the price of NCE components tends to be more than that of Digitrax. The point then must go to Digitrax for its better value for money.

    User Interface

    Jordan and I agree that NCE really shines in terms of how easy it is to pick up and understand the basics of the system. People from all ages can easily learn how the Power Cab works and many of the functions translate directly to the bigger Pro Cab systems. In fact, I can take my Power Cab and use it as a regular throttle on a bigger NCE system. That is something which is more difficult to do with the Zephyr Express which might lead some people to conclude that they should just bite the bullet on a bigger system and skip the Zephyr completely.

    The shape of the throttle and the button layout on the Power Cab is also very well done and hasn’t changed in a significant way since the system’s introduction nearly twenty years ago. To be fair to Digitrax, in 2019 and 2020 the company did an overhaul on many of its products and now Digitrax throttles have integrated some features found on NCE throttles including better ergonomics and soft touch keys in a simple layout that is more intuitive. Even so, NCE is still the better of the two systems in this category.

    Capabilities

    Just how much can you do with DCC? That’s what this category is all about and Digitrax takes this one without much debate. NCE can do a lot of things, but when it comes to more complicated tasks like designing routes with JMRI or putting in a fully automated signaling system, we’ve found that Digitrax is simply the better system.

    Expansion

    Jordan may disagree on this and I will concede that it is situation dependent, but between the two systems NCE just feels like the better system when it comes to expansion. Digitrax is more customizable, but if you are starting with the Zephyr Express you are going to always have one throttle (the Zephyr) which is at a fixed location on the train layout. Sometimes that isn’t a big deal, but other times it is a problem, and that situation specifically is when you want to go play with other people on a larger train layout. The Power Cab’s ability to also act as a mobile throttle gives it an edge here, though I will admit that it is a small edge. When it comes to building a large DCC system, Digitrax’s larger variety of products gives it more options for expansion, but a caveat there is that Digitrax throttles have undergone about three major overhauls whereas NCE throttles have remained pretty much the same. If you have an older Digitrax system and want to update your throttles, you’ll either need to run two radio systems in parallel or you will have to retire all your throttles at once and then purchase new ones.

    External Capabilities

    To put it simply, if you are wanting to supplement your DCC system with third party options, then Digitrax has more products on the market which play well with its system. NCE has its own corner of the market too. For instance, WiFi-Trax out of Australia makes a WiFi throttle board that can communicate with phone apps, giving users the ability to easily control their trains with a smartphone instead of a dedicated throttle. Digitrax though has all that and more.

    Which one should I buy?

    That is the question we asked ourselves and to be honest, if we were both operating completely independently of a club, then we both would likely have Digitrax systems. I personally would opt for the more advanced system options with walkaround capabilities, but Jordan is quite happy with his Zephyr Express. The reason why I own an NCE system is because my local train club, the Black Hills Railway Society, uses the NCE system for its club layout. You can check out the organization on their Facebook Page: https://www.facebook.com/BlackHillsRailwaySociety

    Jordan’s local club operates Digitrax and so that just makes that company more attractive to what he needs. That club is the James Valley Model Railroad Association: https://www.facebook.com/JVMRRA/

    The two systems are indeed quite comparable to each other beyond these differences so really it is a matter of personal preference or what other people are using in your local area if that matters to you. I know for my Black Hills and Fort Pierre railroad I won’t be using either system since that will be an island unto itself. But then again, perhaps a Zephyr would be more user-friendly down the road when that layout is inherited by a museum or gallery? Well, that’s a whole different can of worms and I’ll leave it at that for now.

  • 5 Reasons to Build a Small Layout

    After passing Pierpont Lake, the duo race a summer thunderstorm back to town.

    The first rule of model railroading is have fun.  This is a hobby, after all, and so it makes no sense to turn something fun into difficult work.  With that in mind, the second rule of model railroading is that it’s your railroad and you can do whatever you want with it.  I suppose if we added a third rule it would be to treat others with respect (looking at you, Modeler’s Life), but beyond that there really isn’t too much in the way of rules to follow.

    Naturally, a lot of people in the hobby have a dream of building a gigantic model train layout in their basement, a loft in their garage, or even a separate building.  Many such layouts have been featured in printed and digital media and I can understand the appeal.  Large layouts are a sign of discipline, education, and the accumulation of many years of knowledge about railroads, model trains, and a dozen other skill sets.  However, most of us likely aren’t going to have the chance to build something that big and those who do get the chance might want to consider a few things before breaking out the wood saw.

    The case for a modest train layout

    The fact is most train layouts aren’t particularly large.  The 4’x8’ layout in O scale or HO scale was the standard for decades, and while preferences have changed for how layouts are designed, the amount of space available really hasn’t.  The average train layout today can comfortably fit in a spare room and that’s likely all the room most people have to spare for their hobby.  A number of people have even less space, perhaps only one or two walls of one room that is used for other things, or maybe even a closet!

    Some things we can’t change and space is one of them.  Odds are that even if you move to a new house you and the family aren’t going to place high priority on finding as much space as possible for a train layout.  I mean, you might, but that would be an exception rather than the rule.  With that in mind, modest train layouts have plenty of benefits!

    1. Cost savings

    Train layouts that are on the small side are much more affordable than the basement empires we see in magazines or on Youtube. The fact is most people don’t have a lot of extra money these days to dedicate to leisure activities and at the same time model railroad equipment has gotten more expensive.  By focusing on a smaller layout, overall costs of construction can be brought down in terms of raw materials and equipment.

    2. Efficient Design

    A smaller area to build a train layout requires an efficient track plan in order to maximize the utility of the space. Larger layouts have a tendency to turn into a “spaghetti bowl” or they end up having more track than necessary in order to fill out the space. This doesn’t happen all the time, but it is a noticeable trend that shows up in a lot of the more classic designs. Now, that doesn’t mean you can’t build a model railroad that way, but most people who are low on space are going to think long and hard about what they want to include on their layout. As a result, there is usually a minimum of track and turnouts, key industries that don’t waste space, and other layout design elements that do their job well without wasting materials.

    3. Quicker Construction

    There’s only so much time in the week to dedicate to building a model railroad.  Between work, family, volunteer projects, and all the other things which occupy life, most people only find a few hours a week to enjoy a hobby.  With that being the case, wouldn’t it be great to get a train layout up an operating quickly?  Small train layouts are faster to build as a side effect of having less material to deal with.  Laying fifty feet of track is quicker than laying two hundred feet or more! Building a dozen model kits is faster than building three or four dozen. Wiring two locomotives for DCC takes an afternoon.  Wiring two dozen locomotives takes weeks to complete.

    4. More Details

    Model builders hold detail in high regard.  In fact, behind the smoothness of rollingstock and locomotives, a model’s details are what model railroaders focus on when purchasing a new piece of equipment.  If you only need to buy or kit bash a few items then you can invest more money into those items.  Additionally, fewer square feet to add scenery means it is easier to add a higher level of detail to a train layout.

    5. Comfortable Environment

    This last one is often overlooked by magazines.  Having a train layout is great, but if there is no place to sit and relax then people aren’t going to want to spend much time in the layout space.  Model railroaders in the modern day are also often renters or are purchasing a home with fewer bedrooms.  In such cases it is often unrealistic to expect a train layout to take up a large amount of real estate.  Instead, a small train layout can open up enough space for couches, TV’s, spare chairs, a kitchenette or coffee maker, and all the other creature comforts that make the hobby more enjoyable.

    Modest Layout Examples

    Of course, the first rule in the hobby is, again, its your railroad and you can build it how you want. We’ve all taken this to heart by building layouts that meet our needs without taking up so much space that it intrudes on the rest of the household or spills into our day jobs. That, I think, is a key thing to keep in mind about hobbies. They are meant to be enjoyed, but in order to enjoy them to their maximum potential we also must be able to take a break and not have to think about our modeling projects for short periods of time. Just like everything else, model trains are best done in moderation That’s why a layout is generally not placed in the living room but is instead out in the garage, down in the basement, or even in a dedicated structure.

    Anyway, in order to show what can be done in a modest space, I have a dedicated gallery of sample images from three train layouts. My own Black Hills and Fort Pierre, Jordan Schmieg’s Milwaukee Road Minnesota-Dakota Division, and Mike Thoreson’s TC&W Lakeville Sub. Each image has an included caption with information about what you are viewing so I encourage you to take a stroll through these digital galleries:

    Mike Thoreson’s Lakeville Sub

    Mike is a busy guy. Between work, raising a family, and being the president of the Black Hills Railway Society, there isn’t much room in the schedule for model trains. However, he did find space in the back of his basement to build a small train layout that satisfies his needs, provides storage for his model trains, and a workbench from which he produces some fantastic models! The Lakeville Sub models a small section of Minnesota in the late 1990s and features equipment painted in BNSF and Twin Cities and Western (TCW). The layout is a walk-in shelf design which features a large operating pit and shelves around 3 walls plus a peninsula. It does not have continuous running, but for a one or two man operating crew that is hardly an issue.

    • Mike’s Layout feature’s its own “official” BNSF logo greeting visitors to the layout. Above the sign is the short peninsula which physically encloses the operating pit and provides extra operation potential.
    • An overall view of the layout as it stands back in November, 2024. Mike made sure to do a lot of room preparations before building the layout itself. He now has a sky-blue backdrop ready to go and can make modifications to the lighting now that he knows where everything is going to be placed around the layout.
    • In addition to BNSF and TCW equipment, Mike’s layout also features some oddities such as this United Ag MP15DC switcher.
    • One of the larger industries on the layout will be a grain complex built around an old elevator. Such sights are common across the Midwestern prairie.
    • The “clean” look at the benchwork before Mike began laying track and placing structures. The benchwork is primarily made of 1x4s in an open grid pattern topped with 1 inch extruded insulation board.

    Jordan Schmieg’s Milwaukee Road Layout

    Jordan Schmieg also lives a busy life and his is just getting started! Graduating from the South Dakota School of Mines and Technology this spring, Jordan is looking forward to applying his degree in useful ways as well as finishing his home layout that depicts the Milwaukee Road transcontinental line in the 1970s. Like most model railroaders, Jordan prefers to model in HO scale since it gives him the opportunity to use prototypical equipment for his area and era. In this case, Jordan has a pair of SDL39s plus GP40s and SD40s. He also has some modern BNSF and steam locomotives on his roster as well. Jordan’s main operational interest is whole-train movements which presented him with a challenge in a 14×16 foot space. His solution was a double-track mainline that runs from staging at the back of the layout through the town of Andover, South Dakota where the layout is located. He also found room to model portions of a branch line that ran North to Britton, South Dakota. If you also prefer mainline train action but don’t have a lot of space, Jordan’s layout is proof that you can make it work!

    • Engine 582 leads a northbound ballast train to fix a washout near Britton. This is one of the few times the line sees maintenance; most of the work done is to barely keep it open. In less than 5 years this line will be abandoned and the rails pulled.
    • Engine 206 leads a loaded coal train eastbound through Andover. It is bound for the power station in Big Stone City, SD, on the Minnesota border.
    • Milwaukee Road Bicentennial Unit 156 leads westbound hotshot #201 from Chicago. It will stop in Aberdeen for a new crew and fuel before continuing west to Tacoma.
    • As the Milwaukee’s extensive network of branchlines across the Dakotas deteriorated, derailments became a common occurrence. Here, a wreck is being cleaned up just south of Pierpont on the Andover-Brampton branch.
    • SDL39s 586 and 583 take the weekly branchline job south towards Andover.
    • After passing Pierpont Lake, the duo race a summer thunderstorm back to town.
    • A doe and her twins take a quick glance at the trestle near Pierpont Lake. With the exception of the weekly train rolling over once each way, this spot is quiet most of the time.

    The Black Hills and Fort Pierre in HOn3

    My own home layout takes yet another approach to building a model train layout in a small space. Unlike the other examples in this article I rent my house which excludes me from knocking down walls, painting, or making any hefty modifications. Due to the nature of the lease and the low cost of my rent I would rather not make my landlords angry by leaving them with a tremendous mess to clean up. Frankly, a lot of people find themselves in a similar position. The solution that I found was to design and build a sectional, free-standing layout in the middle of the room with its own integrated backdrop, lighting, and valence. After building four sets of shelves out of 2x4s and press-board, I went about constructing three boxes that work out to being 24 inches deep, 96 inches long, and 28 inches high. These three were then fed into the layout room through a basement window and bolted together. Building the benchwork saved me a massive headache in that I didn’t have to clean up sawdust in a carpeted basement. I am now at the stage where I am laying track and painting backdrops under temporary shop lights. Progress is slow but steady and as of right now I have the track 90% done on one section of the layout and half the backdrops painted!

    • This section called “Nemo” has had the most progress in the last few months.
    • Here is the original track plan for the layout which features tight curves, steep grades, and a very narrow gauge feel to it.
    • I prefer slow speed switching to mainline train action and this layout is designed to meet that desire. Four turnouts make up an entire town and will serve a sawmill, general store, post office, and passenger station.
    • I’ve made substantially more progress from when this photo was taken, however it shows off the design of my benchwork quite well. It is composed of 3/4 inch plywood cut into strips then glued and nailed together into an open frame design that is (almost) square!
    • Steep grades and tight curves will be ever-present in the more mountainous sections of the layout. In this case, both the mainline and the lower leg of a switch back will cross under the upper leg of the switchback leading to the log landing out of frame to the left.
    • To go along with the compact nature of the layout is compact equipment. Narrow gauge trains are typically much smaller than their standard gauge counterparts. In fact, planning out the track for this HOn3 layout isn’t terribly different from N scale projects I’ve done in the past.
    • My layout features hand-painted backdrops which take time to finish. At the moment I have half the backdrops finished and this section is meant for the log landing that runs on a shelf about 5 inches off the lower deck, encasing the staging yard. My backdrops are depicting late summer or early autumn in the Black Hills right as leaves are beginning to turn.
    • My one operating locomotive at the moment is a Blackstone RGS C-16. The Black Hills and Fort Pierre had a very similar locomotive but this one will be used for photography and testing out track. Things are starting to come together though as this photo shows.

  • What is HOn3 and How Do I Get Started?

    Introducing Narrow Gauge!

    Of all the different modeling scales that hobbyists can invest in, HO scale (1:87th) is by far the most popular.  An aggregate of different polls conducted over the years shows that while HO scale isn’t quite as dominant as it was twenty years ago, today 60-70% of model railroaders still choose HO scale as their primary modeling scale.  However, an increasing number of hobbyists are choosing N scale (1:160) to model in for a few reasons.  If you are having trouble choosing, I recently made such a post discussing the issue which you can find here.  But one thing I omitted from that article is that there is a third option available to hobbyists who prefer larger trains but don’t have a ton of room for a train layout.

    “Three rail” track with both 3ft narrow gauge and 4ft 8.5in standard gauge.
    Modern standard gauge mainline near Edgemont, South Dakota.

    That option is called “HOn3” or HO scale trains running on tracks that are narrower than standard gauge.  In HO scale, standard gauge is 16.5mm, but HOn3 trains run on tracks that are a scale 3ft (914mm) apart at 10.5mm gauge. I left out this option because there are some caveats with modeling HOn3.  For one thing, modeling narrow gauge railroads is a niche market within the hobby.  Unless you are modeling Colorado narrow gauge, finding prototype information is more difficult, finding prototypical rolling stock and locomotives are harder still.  Most narrow-gauge railroads also ran in the 1880-1910 era which isn’t as popular as modeling the 1950s, 1970s, or even present day.  The learning curve is higher as well since many models are only available in kit-form or there may not be a commercially available product at all for certain locomotives or rollingstock.  This requires a high degree of model-building skill that a novice is unlikely to possess.  Nonetheless, HOn3 does have a few advantages.

    Narrow gauge railroads were most common from the 1880s to the 1910s.

    Benefits of HOn3

    1. Saving Space

    HO scale is great for the high potential of detail fidelity found on model trains. Even budget-minded rolling stock and locomotives have a good amount of detail included which a lot of models in larger scales lack.  Not to mention that the latest generation of HO scale models have separately applied details that rival or exceed what scratch builders were doing two decades ago.  However, the size of the trains gets to be an issue when it comes to building train layouts.  Americans in particular have always been fond of building circuitous train layouts where the train can travel endlessly on a loop of some kind.  Only recently has there been a movement in the states to build train layouts that run point-to-point using as few turnouts as possible to serve all the industries along the route.  Authors such as Lance Mindheim have been promoting this design philosophy for years now and it has now begun to manifest itself in new layouts being built.

    Same scale, very different sizes! Above: On the left is a typical 3ft gauge boxcar while on the right is a standard gauge 40ft boxcar. The 40ft boxcar can hold approximately twice the volume of the narrow gauge car. Left: Narrow gauge tends to have narrower and shorter equipment that rides on smaller wheels that are 24-28 inches in diameter.

    Even so, turn radius is a problem.  Realistic curves in HO scale would be tens of feet in radius and the practical curves people end up using typically fall in a range of 20-30 inch radius.  Train length is also a problem. A cut of twenty 50-foot boxcars in HO scale takes up about twelve feet of space!  HOn3 on the other hand can comfortably use 18-20 inch radius curves and require much shorter sidings due to the shorter train lengths involved.  A long narrow-gauge train (DRGW not withstanding) might only be a dozen cars or so.  The Black Hills and Fort Pierre, which I model, had locomotives that could only pull about ten cars.  Obviously, structures are going to take up the same amount of space as will roads, but narrow-gauge railroads often operated in hilly or mountainous terrain that was decidedly rural.   That means fewer structures, fewer roads, and as much green scenery as you have room for!

    Locomotives have the same effect as the rolling stock. The narrow gauge engine on the left is a 2-8-0 while the one on the right is a 4-6-0 “ten wheeler”. Both are considered mid-sized locomotives on 3ft gauge and standard gauge track, respectively.

    2. Unique Prototypes

    Perhaps it’s just a personal problem, but I’ve never had much interest in modeling railroads everyone else is already familiar with.  Modern class I’s like BNSF and Union Pacific as well as fallen flags like the New York Central or the Pennsylvania railroad just don’t appeal to me beyond a generic historical context.  You know what is fun?  Taking the path less-worn or even forging a new trail completely!  HOn3 has a lot of opportunities to explore prototypes that few people have ever even heard of.  Montana Southern?  Burlington and Northwestern? Oahu Railway and Land Company?  All three were narrow gauge railroads operating in the Pioneer Mountains of Montana, the cornfields of Iowa, and the Big Island of Hawaii respectively.  There are literally hundreds of narrow-gauge prototypes in North America and most of them were 3ft gauge.  Even the more popular railroads on the narrow-gauge scene like the Denver and Rio Grande Western or Westside Lumber Company have a much smaller fanbase than the standard gauge class I’s from the last sixty years or so.

    F&CC boxcar that was once used on the Montana Southern Railway.
    Drop-bottom gondola still in Montana Southern lettering in Virginia City, MT.

    3. Art of Model Railroading

    Okay, now while it is possible to view standard gauge model railroads as being works of art (looking at you, George Sellios!), there is something about narrow gauge which challenges hobbyists to get more creative with the scenery and detailing.  Perhaps it’s the higher learning curve or maybe a side-effect of attracting people who want to physically make the most on their layout, but some of the finest model railroads to ever be created are HOn3.  A prime example is Harry Brunk’s famous Colorado & Southern model railroad that now sits on display in Cheyenne, Wyoming.  The layout was constructed over several decades by a master modeler and the end result is a model railroad like no other.  These days it is easy to purchase ready-to-run models right off the shelf and run diesel locomotives that perfectly match the prototype.  Heck, even recently Athearn admitted to making the egregious error of having the wrong light arrangement on one of their diesel models!  Fifty years ago people were happy just to have a model of a locomotive at all but now this is grounds for a recall.  That’s not a complaint, by the way.  I think it’s amazing that a company admits to such a mistake and does whatever it can to correct it, but I digress.  With HOn3, you have to make most things yourself or modify commercially available products.  Outside of a couple of manufacturers, you aren’t buying ready-to-run models.  Most people see that as a huge negative, in which case HO standard gauge is waiting with open arms.  But for those who want to create, HOn3 provides a lot of opportunity out of necessity.

    Local model railroader, Jack Afinson, is an avid HOn3 modeler. This particular diorama is three-railed with both standard and narrow gauge track, but it also shows the work that Jack puts into his work. This diorama isn’t just a window to the past, it is a work of art on display at the South Dakota State Railroad Museum in Hill City, SD.

    So, how do I get started in HOn3?

    Now ain’t that the million-dollar question?  And yeah, that number isn’t as far off as you might think!  Getting started in HOn3 is no doubt more difficult than HO standard.  For one thing, the only ready-to-run locomotives out there with DCC and Sound are made by Blackstone.  Problem is that this company hasn’t really been making any new runs in the last several years and their product line is almost exclusively Colorado-based.  Ther companies like Micro Engineering make track and turnouts, but that too is sometimes hard to locate.  Micro Trains even did some rolling stock runs but haven’t made anything recently.  Are you noticing a theme yet?  If you want to get started in HOn3 model trains, you can’t just pop on over to the local hobby shop and get a train set.

    Unlike with HO standard gauge, the best place to get started with HOn3 is to begin reading about prototype railroads.  Train shows are a great place to find old books nice and cheap but Ebay, Amazon, and other digital marketplaces will have books about narrow gauge railroads as well. You can supplement your reading with videos on Youtube or from production companies like Green Frog videos.  Regardless of your medium of information, the goal is simply to find what you like.  The next step then is to figure out what products are available for your chosen prototype or for what matches the aesthetic you want to go for.  You’ll be able to quickly put together a list of models to be on the lookout for.

    This particular train cost… drum roll please… $800! Expensive, right? Except that’s about the same price as a BLI Big Boy direct from the factory. This consist is more useful in my opinion because now I have a smooth-running test train that is also quite photogenic. Included in the image are, from Blackstone; an RGS #40 C-16, a Rio Grande 28ft reefer, and a D&RGW 30ft boxcar, and a brass Westside Models D&RGW long caboose.

    After that, my next suggestion is to save a bit of money to purchase a bit of track plus a Blackstone locomotive and a few cars that are either commercially made or have been built for you already.  Throw in a DCC system as well. Why?  Because at least this way you’ll have a nice-looking and smooth-running train to run while you accelerate up that learning curve!  Now, the price tag for such a thing isn’t going to be cheap.  In today’s dollars, expect to spend somewhere between $1200 and $2000.  Yes, that’s quite the entry fee!  The good news is that relative to other scales, you really aren’t spending more money.  In fact, if you build most things yourself you’ll be coming out ahead in the long run because you need less equipment, less track, less buildings, and less space.  On my home layout, almost everything is going to be built from scratch or from kits.  Even my trio of brass 2-6-0’s only cost me an average of $250 each.  The issue is I need to invest another $400 apiece to get them running smoothly with a modern can motor along with DCC, Sound, painting, weathering, and custom decals.  The point is that you’ll be spending more time to save money after that initial plunge and in the end you’ll be a better modeler for it. To elaborate further and show my suggestions in action, I am actually planning a build series that focuses on this set-up as a starting point for someone new to HOn3.  A simple layout with a minimum of equipment at a budget that most people can afford if they save money for a few months or a year.

    Conclusion

    You might be a bit disappointed with my sales pitch for HOn3, but if I’m honest that is kind of the point.  There are advantages to HOn3, but several challenges as well.  You can’t just go to a train show and pick up a bunch of five-dollar freight cars out of the bargain bin. Even if you do manage to find such a score, they will all be old kits that you have to build, paint, and make run reliably.  Good engines are hard to come by, but when you find one you will cherish it and you’ll want to make the investment to make sure it runs better than anything a standard gauge modeler can get their hands on directly from a manufacturer. You’ll need to do some research as well, but this too will make you a better modeler and an amateur historian.  And to supplement these high-quality models you’ll be building, you’re going to want to construct a more detailed, museum-quality layout.  So really, HOn3 modeling and narrow-gauge modeling isn’t for the faint of heart.  It requires money, time, and dedication to improving your craft. I’d say that for most people, this will be what turns them back toward standard gauge modeling.  But for an intrepid few, HOn3 is a brand new canvas upon which they can create a masterpiece.